Mounting Location - Harrington Hoists RHN02D-20A-20D Series Owner's Manual

Electric wire rope hoist and trolley rhn series 2 ton through 20 ton capacity

Table of Contents

Figure 3-2

Lift Point for Deck Mount

3.3

Mounting Location



3.3.1

adequate and capable of withstanding the forces generated by the hoist and the load. Therefore,

the substructure must be torsion resistant and level (See

mounting the RHN trolley hoist ensure that the trolley beam and its supporting structure are adequate to

support the trolley hoist and its load. (See

qualified to evaluate the adequacy of the suspension location and its supporting structure.

3.3.2

Ensure that there is adequate vertical and horizontal clearance along the entire range of the trolley

hoist's motion.



3.3.3

Prior to mounting the RHN deck mounted hoist, ensure that the substructure is

Table

See

Section 6.8

for outdoor installation considerations.

Figure 3-3

Lift Point for Trolley Hoist

Table 2-12

for more details). Prior to

2-13). If necessary consult a professional that is

Table of Contents

Show Quick Links

Table of Contents