Before First Use; Attaching The Juicer - Westfalia GS-306L Instruction Manual

Before first Use

Clean all parts of the unit before using the first time as described below under
"Cleaning" on page 10.
Assembling the Juicer
1. Place the motor unit (8) on a steady and level surface. To avoid personal
injuries never touch the juicing net when handling the accessories, during
operation or on the assembled unit.
2. Place the juice net holder (4) on the motor unit (8) in that way, that the
ejection opening slots into the matching notch of the motor unit.
3. Insert the juicing net (3) into the juice net holder (4) and turn the holder
slightly to the left or right until the holder locks into the rotor.
4. Place the funnel lid with splash guard (2) on the juice net holder namely
opposite to the ejection opening (11).
5. Tilt up the carrying handle / safety loop and press it into the corresponding
holders on the funnel lid.
The unit is equipped with a safety appliance. The unit does not start, when
the handle is not clamped on the funnel lid and the juicer net does not seat
accurately.
6. Push the pomace container (6) below the pulp spout (12). Here, as well, the
splash guard should enclose the seam of the pomace container.
Tip: To minimise the cleaning effort, please coat the pomace container with a
suited bag. You collect the pomace in the bag and dispose of it in an easy
and comfortable way.
7. Place the juice collecting tank (9) in front of the ejection opening (11).
8. Plug the power plug in a wall socket. The settings on the turn-switch (13) are
for the following usage:
0 = Stop
I = Low Speed
II = High Speed
Operating
8