Advertisement
Confirmation of Packing Contents
The shipping package of the VIBRAPHONE VARIABLE-SPEED DRIVER should con-
tain the parts shown below.
Before assembling the instrument, confirm that all parts are included as listed.
* If a part is missing, please contact your dealer or qualified Yamaha service personnel.
q Owner's Manual
(this document) × 1
w Controller × 1
Assembly
1.
Attach the controller.
(1) Hook the notch at the upper part
of the controller to the screw that pro-
trudes from the lower front of the tre-
ble side of the vibraphone, and then
(2) secure the hole on the other side
of the upper of the controller using
the bolt attached to the vibraphone.
(2)
e Driver × 1
r Timing belt × 2
t Yamaha representative or
y Legal compliance leaflet × 1
2.
(1)
(YVD20)
authorized distributor list × 1
Attach the driver.
With the pulley to your right side and
the connector end of the cable fac-
ing you, (1) insert the driver into the
driver attachment from below, and
then (2) secure it with the cup head
square neck bolt and the wing nut.
(2)
(1)
Cup head
square neck bolt
YVD20 YVD10 Owner's Manual
Fan belt × 2
(YVD10)
Pulley
17
Advertisement
