Page 1
Radiant Heater Instruction Manual Oscillating Parabolic Parabolic Radiant Heater Model No. QGW08-608 Stop Please read and understand this manual before any assembly or use of this product. Before beginning assembly of product, make sure all parts are present. Customer Service: 1-888-538-0082 / service@hena.ca...
Oscillating Parabolic Radiant Heater Table of Contents Important Instructions Product Information Product Diagrams Operations Instructions Safety Features Cleaning, Maintenance and Storage Troubleshooting...
Oscillating Parabolic Radiant Heater Important Instructions PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER. Read all instructions carefully before attempting to assemble, install, operate or service this electrical appliance. Protect yourself and others by following all safety instructions. Failure to comply with safety instructions could result in personal injury and/or property damage.
Oscillating Parabolic Radiant Heater DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of this heater contains no user-serviceable parts. All servicing should be performed by qualified personnel only. 18.
Oscillating Parabolic Radiant Heater Product Diagrams Front Back Control Protective Grille Power Knob Tip-over Safety Switch (on bottom) Reflection Hood Base Timer Knob Carry Handle Operations Instructions 1. Carefully remove the heater from its carton and bag. 2. Make sure the heater is located on a flat and stable surface prior to turning it on. Damage and 3.
Oscillating Parabolic Radiant Heater Safety Features Polarized plug This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
Oscillating Parabolic Radiant Heater Troubleshooting If the heater fails to operate, check the following before making a service call: Problem Possible Cause Solution Heater will not Heater is not plugged into a 120V Ensure unit is in OFF position. Plug in power on.
Need help?
Do you have a question about the QGW08-608 and is the answer not in the manual?
Questions and answers