Amazon B07K8XX4GJ Quick Start Quide

Rollaway guest bed with 4-inch memory foam mattress

PART 1: Assembly of your rollaway-bed:

Step 1: Unbox the rollaway Bed & Invert the Bed

in Upside down position.

Step 1: Place the bed at your suitable location in your room.

Step 2: Lock all the four Castors with the Push down button

as shown in the image.

PUSH THE CLIP

DOWN TO LOCK

Step 4: Pull down side-A of your bed.

Step 2: Fix the Castors as shown in Image & then get the Bed in

Upright position with Castors on the ground.

Step 3: Unbuckle the clips.

Table of Contents

Do you have a question about the B07K8XX4GJ and is the answer not in the manual?

Page 1 PART 1: Assembly of your rollaway-bed: Step 1: Unbox the rollaway Bed & Invert the Bed Step 2: Fix the Castors as shown in Image & then get the Bed in in Upside down position. Upright position with Castors on the ground. PART 2: Unfolding of your rollaway-bed for use: Step 1: Place the bed at your suitable location in your room.
Page 2 Step 5: Pull down side-B of the bed and your bed is ready for use. Note: you can demarcate any side of your bed as “A” or “B”. The demarcation as provided in this assembly manual is only for your reference and for enhancing your understanding of the assembly instructions.
Page 3 Step 1: Pull up side-A by gently pushing the available red-clip using your thumb and pull the side of the bed to an upright position to that of the ground. Step 2: Now pull up side-B by gently pushing the red-clip using your thumb as you did for side-A of the bed.