Klarstein METROPOLITAN Operation page 20

Ice cube maker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
EN
20
Problem
Indicator lights on
display are not on.
The Ice made is too
large and with pieces
sticking together.
Conditions for Ice
making Cycle are right
but no ice is made.
The lights of ice full and
deficient come at in the
same time.
Ice full indicator light
on but with less ice in
the basket
Lack of water indicator
is on but water tank
has a lot of water
Power light is off when
switching on.
Possible Cause
Suggested Solution
Blown fuse/ No
Replace fuse / Turn power on
power.
Wrong ice size is
Select the M or S ice size.
selected.
Ice of previous cycles
Stop the unit right away,restart the
left in the water tray.
unit till the ice in water tray melt
down.
The evaporator is too
Shift the evaporator a little.
low.
There is no refrigerant
Call for service.
in the compressor.
Compressor is broken
down. Fan motor is
broken.
Water tray is blocked
Clear the ice cube under the ice
by ice cube.
shovel pull out the plug and insert
It again then press the "START"
button, two minutes later the
machine will restart automatically.
Room temperature is
Take out the ice basket and put
too low.
it back until the light is off, and
restart the machine.
The sensor was
Please ask for a technician to
broken.
repair.
The sensor was
Please ask for a technician to
broken.
repair.
Blown fuse/ No
Replace fuse / Turn power on
power.

Advertisement

Table of Contents
loading

This manual is also suitable for:

10031881

Table of Contents