Table of Contents
Advertisement
Using the Belkin Wireless Client Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server.
WPA-PSK (no server) is typically used in home and small
office networking.
1.
From the "Security Mode" drop-down menu, select "WPA-PSK
(no server)".
2.
Enter your network key. This can be from eight to 63 characters and
can be letters, numbers, or symbols. This same key must be used
on all of the clients (network cards) that you want to include in your
wireless network.
3.
Click "Apply Changes" to finish. You must now set all clients
(network cards) to match these settings.
24
24
Advertisement
Table of Contents
