Table of Contents
Advertisement
Installing and Setting Up the Card
4.6
Select a network to connect to by
double-clicking on a network from
the Network List.
Note: In order to see your available
networks, you must be near a
working wireless router or access
point. If using with the Belkin
Wireless Pre-N Router, connect to
the "Belkin_Pre-N_" SSID network
name. The network name may be
followed by six numbers, which are
specific to your router.
4.7
The Profile screen will appear to
save the settings to the network
selected. Click "Save & Activate"
to save the Profile and activate it.
4.8
The Signal Indicator icon should
appear green in your system
tray (bottom right corner of most
screens). The color of the icon
reflects the connection link: green
for good, yellow for weak, red if
it is not active, and a red X if the
radio is turned off.
Installation is now complete!
13
13
1
2
3
4
5
6
Advertisement
Table of Contents
