Advertisement
Quick Links
PSE- series Operating manual
1. Specifications and performance indexes
Model
Capacity
Resolution
Calibration
Graduation
Dimension of
platform
AC/DC ADAPTOR Input AC100-240V Output DC6V/300mA or 4 pieces 1.5V AA batteries
Power Supply
Working Sketch
2.Shape and installation of scale：
1.Battery symbol
5.COUNT
9.Input interface
12. Adjustable feet
PSE-30
PSE-45
30kg
(0~10kg)/1g
(0~15kg)/2g
(10~30kg)/2g
(15~45kg)/5g
20kg
218*300mm
Picture 1
（picture 1）
2.LCD display
6.LIGHT
10. Power socket
13.Plastic scale pan
PSE-75
45kg
75kg
(0~25kg)/5g
(25~75kg)/10g
40kg
50kg
3.On/off switch
7.TARE
8.Data line
11.Output interface
PSE-150
150kg
(0~50kg)/10g
(50~150kg)/20g
100kg
320*380mm
Picture 2
4.UNIT
Advertisement
Related Manuals for G&G PSE Series
Summary of Contents for G&G PSE Series
- Page 1 PSE- series Operating manual 1. Specifications and performance indexes Model PSE-30 PSE-45 PSE-75 PSE-150 30kg 45kg 75kg 150kg Capacity (0~10kg)/1g (0~15kg)/2g (0~25kg)/5g (0~50kg)/10g Resolution (10~30kg)/2g (15~45kg)/5g (25~75kg)/10g (50~150kg)/20g 20kg 40kg 50kg 100kg Calibration Graduation 218*300mm 320*380mm Dimension of platform AC/DC ADAPTOR Input AC100-240V Output DC6V/300mA or 4 pieces 1.5V AA batteries Power Supply Picture 1 Picture 2...
- Page 2 (picture 2) 1.Battery symbol 2.LCD display 3.On/off switch 4.UNIT 5.COUNT 6.LIGHT 7.TARE 8.Data line 9.Output interface 10. Adjustable feet 11. Input interface 12. Scale pan 13.Power socket 3.Operation method： 3.1 Before using the scale, place it on a stable platform and adjust its feet to make the scale level, please 15 minutes Power on before using.
- Page 3 displays “0”. Then place the article in container, at this time, it shows the net weight of the article, remove the article and the container, the scale shows a negative value of container weight. Still press “TARE” to return to “0”. 3.2.3 “LIGHT”...
- Page 4 4. Setting and meaning To reach the “setting-mode” you have to reboot the scale, so begin by turn it off. Now hold down the “UNIT”-key and press the “ON/OFF”-key to start the setting mode. Pressing the “UNIT”-key can change the parameters (C1-C3), pressing “TARE”...