Installing And Setting Up The Adapter - Belkin F5D6050 User Manual

Placing the Belkin Wireless USB Network Adapter
A six-foot USB cable is provided with the Adapter to allow you to place it as high as possible. The best location is on top of
your computer's monitor. Placing the Adapter on your desktop is acceptable, however, avoid placing the adapter near
metal objects such as a computer case or speakers. Any object that is metal has the ability to block the radio signals from
the Adapter.

Installing and setting up the Adapter

Installing your Adapter is done in three easy steps.
1. Install the software FIRST. If you connect your adapter to your PC before you install the software, it will not work
until you install the software.
2. Connect the Adapter to your MAC.
3. Configure the Adapter and MAC TCPIP Settings
NOTE: INSTALL THE SOFTWARE FIRST BEFORE YOU CONNECT THE ADAPTER TO YOUR COMPUTER
Step 1: Software and Driver Installation (Mac OS 10.1.5 and higher including 10.2.x)
1. Insert the CD into your CD-ROM drive.
2. Double-Click on the CD-ROM disk located on your desktop.
3. Drag the icon with the file named "Belkin_F5D6050X10********.dmg.gz" to your desktop.
4. Double-Click on the file named "Belkin_F5D6050X10********.dmg.gz".
5. Double-Click on the file named "Belkin_F5D6050X10********.dmg".
6. Double-Click on the newly mounted disk image "Belkin 11Mbps Wireless USB Adapter".
7. Double-Click on the Package "F5D6050".
8. If administrator rights are required, please click the lock icon to make changes.
9. Type your user name and password, then click "OK".
10. Click on "Continue" to begin installation.
11. Click on "Continue" to proceed with installation.
12. Click on "Continue" after reading the Software License Agreement.
13. Click on "Agree" to accept the Software License Agreement.
14. Select a destination volume to install the software by double-clicking on the listed icon.
15. Click on "Continue" to proceed with installation.
16. Click on "Install" to proceed with installation.
17. Click on "Continue Installation" to install files.
18. Click on "Restart" to reboot you machine. While the computer is rebooting, plug the USB cable into the adapter
and connect it to an available USB port on your PC or USB hub.