P74056_F5D6001_man(fp).qxd
5/3/2002
5:09 PM
wireless networking
5.
The "Wireless Network Connection Properties" window will appear. Click
on the tab labeled "Wireless Networks".
6.
Remove the check mark next to "Use Windows to configure my wireless
network settings".
7.
Click "OK".
8.
Windows XP is now configured to let the Belkin software control the
Card. Follow the directions in the next section titled "Windows 98, Me,
2000" to operate the Card.
12
Page 12
wireless networking
Windows 98, Me, 2000
The Card is equipped with a management utility that allows you to change
the settings of the wireless Card, see the wireless signal strength, turn the
Card's radio on or off, and much more. The Card also puts an indicator icon
in the bottom right-hand corner of your computer (the system tray) that
gives you a quick look at your wireless signal quality.
Green
Yellow
Red
To Open the Wireless Manager Utility Screen
To access the management utility, double-click on the
98, Me, 2000) or
your computer screen. The "Belkin Wireless LAN Utility" window will
open. You will see the "Link Status" tab. There are four tabs that
perform different functions.
or
: Excellent signal quality
or
: Fair signal quality
or
: Poor to no signal quality
icon (Windows
(Windows XP) in the bottom right-hand corner of
13