Advertisement
SOFTWARE INTRODUCTION
* Click "Mixer" for mixing interface, the interface may enter the corresponding mixing
input source by switching, high level interface is as follows.
* Click the "Not Connected" button to connect to the host with a PC.
* Click on the input source drop-down list to select the input source. Bluetooth, Analog
and USB.
B. Channel equalizer editing area
Main function configuration: Equilibrium design of current output channel, 15-band
equalization adjustable: frequency, Q value (response bandwidth) and gain
(increasing or decreasing the frequency response amplitude near the frequency
point).
Among:
* "Reset equalization" button: It is used to restore the parameters of
the 15-band equalizer to the original pass-through mode (the
frequency of the equalizer, the Q value and the gain are restored to
the initial value).
6 EN
Advertisement
