Clas Ohlson LR-450036 Quick Start Manual

Micro-LED
Christmas Tree 210 cm
Art. no 44-4335 Model LR-450036
Please read the entire instruction manual before using the
product and then save it for future reference. We reserve the
right for any errors in text or images and any necessary
changes made to technical data. In the event of technical
problems or other queries, please contact our Customer
Services (see address details below).
Safety
Warning:
• Phe product is intended for indoor use only.
• The LED lights cannot be replaced.
• The product must only be connected to the included mains
adapter.
• The mains adapter is only intended for using with the
included product. Never connect additional string lights or
other types of products to the mains adapter.
• The mains lead must never be replaced. If the mains lead is
damaged the entire product must be discarded.
Assembly
1. Open up the stand, line up the holes and screw in the
screws loosely.
2. The lights built into the different
sections of the tree need to
be connected together. Check
where the connectors are
located before beginning to
assemble the tree. Insert the
bottom section (A), the part with
the longest branches, into the
stand and tighten the screws.
Fold out the branches and
adjust them as you like.
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
3. Fit the middle section (B) and lastly the top section (C).
Screw the connectors together. Screw the mains adapter
to the lights and then plug it into an electrical socket.
4. Simple as that!
Lights
Timer
- Hold in the timer button for 3 seconds to switch on
the LED lights on the tree. The lights will stay on for 8
hours and then switch off for 16 hours before coming
back on again automatically for 8 hours, and so on in
a continuous cycle.
- Hold in the button again to switch the lights off
permanently.
Effects
Push repeated times on the button
on the effects box to see what type of
lighting you would like to have.
Care and maintenance
The product can be cleaned using a damp cloth or vacuum
cleaner. Use only mild cleaning agents, never solvents or cor-
rosive chemicals.
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal, the
product must be handed in for recycling so that
the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
Mains adapter Input 220–240 V AC, 50/60 Hz
Output 12 V DC, 6 W
IP20
IP rating
210 x 150 cm
Dimensions