Measurement Modes - Delta -T 9X45.HD.RF User Manual

MEASUREMENT MODES

The binoculars have three measurement modes: AUTO, SPORT,
HUNT.
SPORT: When measuring multiple targets, the distances of the
targets closest to the user are displayed. In this mode, objects
other than the target itself are not measured. In this mode,
measuring the distance takes about 3 seconds.
HUNT: When using continuous measurement (scan) mode and
measuring multiple targets, the values for the targets farthest
from the user are displayed.
CONTINUOUS MEASUREMENT (SCAN) MODE
In AUTO and HUNT modes, the user can also take measurements
in continuous (scan) mode. To do this, press and hold the button
No. 2 for approx. 3 seconds. The binoculars then switch to the
scanning mode and take continuous measurements. The continuous
measurement mode turns off when the No. 2 button is released.
Continuous distance measurement is helpful for small or moving
targets. Continuous (scan) mode is limited to 20s.