Additional Measurements - Delta -T 9X45.HD.RF User Manual

ADDITIONAL MEASUREMENTS

The binoculars have three additional functionalities. After selecting
the desired functionality, the value is displayed alternately with the
linear distance measurement.
T
V
H
T. Angle measurement. This is the angle of the binoculars relative
to the observed object.
V. Vertical measurement. It is a measurement of the height of the
measured object.
Note: The height of the observed object is measured from the
position of the binoculars, not from the ground.
H. Horizontal measurement. This mode measures the equivalent
horizontal distance.
OFF. Disabling additional measurement parameters. After pressing
OFF the binoculars measure linear distance to observed object.