Summary of Contents for Delta DELTA-T 9X45.HD.RF
- Page 1 RANGEFINDER BINOCULAR DELTA-T Pantone 2728C (symbol) and black 9X45.HD.RF T H E A I M O P T I C A L P E R F E C T I O N...
- Page 2 USER MANUAL Thank you for purchasing the Delta-T 9x45.HD.RF binoculars. All over the world Delta stands for high quality. To enjoy your binoculars for many years to come, please read the instructions in the user manual. OPTICS Magnification 9× Objective diameter...
- Page 3 Greater range Lower range Target size: large small Aiming angle: straight sharp Structure of the object: uniform, e.g. wall a non-uniform, e.g. bushes Insolation: slight very high (sharp sun) CONSTRUCTION OF BINOCULARS 1. Lens 2. 1/4” mount 3. Settings button (SET) 4.
-
Page 4: Battery Insertion And Removal
BATTERY INSERTION AND REMOVAL The binoculars are powered by a CR2 3V battery. Before using the binoculars, unscrew the battery compartment cover located in the central focus adjustment knob by turning it counterclockwise. If the battery is pre-installed, remove the plastic pull tab from between the cap and the battery. - Page 5 NECK STRAP ATTACHEMENT Delta-T 9x45.HD.RF binoculars come with a neoprene neck strap. Pass it through the lug of the binoculars and through one lug of the rainguard (eyepiece lens protective cover).
- Page 6 USING THE BINOCULARS WITH AND WITHOUT YOUR GLASSES ON Delta-T 9x45.HD.RF binoculars have adjustable eyecups. Using the binoculars with your glasses on: Twist the eyecups down by turning them clockwise until the eyecups lock in the lowest position possible. Using the binoculars without your glasses on: Twist the eyecups up by turning them clockwise so that the eyecups lock in the highest possible position.
- Page 7 ADJUSTING THE INTERPUPILLARY DISTANCE The proper distance between the two barrels of the binoculars should be set so that when you look through the binoculars with both eyes you will get a round image. If the interpupillary distance is incorrect, you will not be able to obtain a stereoscopic image and some dark spots and unexpectedly large chromatic aberration may appear.
-
Page 8: Laser Rangefinder
LASER RANGEFINDER Delta-T 9x45.RF.HD binoculars are equipped with a precise laser rangefinder that allows for precise measurement of the distance between the user and the target. USING THE RANGEFINDER’S FUNCTIONALITY: To access the binoculars’ menu, press the SET (3) button for approx. -
Page 9: Measurement Modes
MEASUREMENT MODES The binoculars have three measurement modes: AUTO, SPORT, HUNT. SPORT: When measuring multiple targets, the distances of the targets closest to the user are displayed. In this mode, objects other than the target itself are not measured. In this mode, measuring the distance takes about 3 seconds. -
Page 10: Additional Measurements
ADDITIONAL MEASUREMENTS The binoculars have three additional functionalities. After selecting the desired functionality, the value is displayed alternately with the linear distance measurement. T. Angle measurement. This is the angle of the binoculars relative to the observed object. V. Vertical measurement. It is a measurement of the height of the measured object. -
Page 11: Display Brightness
The display is set to position 3 by default. MOUNTING THE TRIPOD ADAPTER Delta-T 9x45.HD.RF binoculars are equipped with a socket for attaching a tripod adapter with a 1/4 inch thread. To mount the tripod adapter, unscrew the mounting socket cover on the front of the device between the objective lense barrels.