Usb Update; Self Diagnosis - Samsung F27T70 User Manual

USB Update

Update software using an update file on a USB device.
1
Save the update file (in .bin format) that you downloaded from the Samsung Electronics website
(http:/ /www.samsung.com/sec) to a USB device.
2 Connect the USB device to the SERVICE port (
Select → Support → Software Update
3 Follow the instructions on the screen to proceed with update.
4 Your product will turn itself off and on again automatically after completing update, and then turn
off your product.
5 Remove the power cord from the power outlet and then reconnect the cord after turning off.
― To perform software update by using a USB device, first format the USB device to FAT32.
― When updating by a USB device, be sure to use the device whose version of USB 3.0 or lower.
― When performing update, make sure that only one BIN file ( .bin) is saved in the root directory.
― If the
No USB devices detected. Please check and try again.
the following reasons.
― A USB device is not connected to the SERVICE port (
― The files in the connected USB device are not compatible formats.
― There are no valid update files found in the connected USB device. (There are no update files saved in
the memory or the file names are incorrect.)
) on the monitor.
.
message is displayed, this is probably due to
).

Self Diagnosis

1
Use the Function Key Guide and go to
1920*1080 60Hz
Language
Picture
Display
Color OnScreen Display
Color
Sound
Gaming Setup Game
Reset All
Input Source
USB Update
System
Self Diagnosis
User Setup
2 Select OK when the following screen is prompted.
The test screen will now be shown.
Please look carefully at the screen for the next 5 seconds.
OK
•
Review the test screen.
―
Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt
testing.
→ System → Self Diagnosis .
FreeSync Premium
25