Installation; Attaching The Stand - Samsung F27T70 User Manual

Installation

Attaching the Stand

1
Insert the support rod into the bottom bracket
in the direction shown in the figure.
Tighten the connecting screw at the bottom of
the bracket to fix the support rod firmly.
5
The base is assembled.
X 4
2
Place the protective Styrofoam (cushion)
included in the package on the floor and
place the product facing down on the
Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick
sitting mat.
― Before assembling the product, place the product down on a flat and stable surface so that the screen is
facing downwards.
3
Put the bracket into the groove of the rear
case as shown in the figure. Pay attention to
inserting the protrusions on the back shell
into the corresponding grooves on the
bracket when putting it in.
4
Follow the arrow instructions, tighten the screws,
to install the bracket and the display in place.
12