Correct posture to use the product Connection Using an DP Cable Connection Using the D-SUB Cable (Analog Type) Troubleshooting Guide Connecting to headphones or earphones Requirements Before Contacting Samsung Connecting the Power Preparations Customer Service Centre Earphone Holder Product diagnosis (Screen issue)
Page 3
Table of contents Specifications General Standard Signal Mode Table Appendix Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others FreeSync (for AMD graphics card)
Do not disconnect the power cord while the product is being used. This symbol indicates that this • Only use the power cord provided with your product by Samsung. Do not use the power cord with product has included important DC voltage: Rated voltage marked with other products.
‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a • Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒ Be sure to power off the product and disconnect the power cord when water or other foreign ‒ Contact Samsung Customer Service Centre for repairs. substances have entered the product. Then contact Samsung Customer Service Centre. • To move the product, first disconnect all the cables from it, including the power cable.
Page 7
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage • Do not hold the product upside-down or move it by holding the stand. burn-in or defective pixels. ‒ The product may fall and become damaged or cause an injury. ‒...
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects.
Chapter 02 Preparations Installation Attaching the Stand (F27G3*T*) Place the stand neck on the display, as shown in the Take out the base and lock it on the The mounting completes. Place the protective Styrofoam (cushion) figure. When you place the stand neck, ensure that bracket with 6 screws as shown in included in the package on the floor and the two guides on the stand neck can be inserted into...
Removing the Stand Precautions for moving the product ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. • Hold the lower corners or edges of the • Do not directly apply pressure on the screen.
Checking the space around the product The height of the monitor can be adjusted. Make sure to have enough space for ventilation when placing the product. An internal temperature rise - Up/down adjusting height: 130.0±5.0 (F27G3*T*) may cause re and damage the product. Maintain enough space around the product as shown in the - Up/down adjusting height: 110.0±5.0 (F24G3*T*) diagram when installing the product.
If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a with your anti-theft locking device for details.
Control Panel Parts Description This LED is power status indicator and works as Power On (Power button): On The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Power saving mode: Blinking Power LED Power Off (Power button): Off...
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Ports ― The functions available may vary depending on the product model. The colour and shape of parts may differ Before connecting the product, check the shapes of both ports of the supplied signal cables and the from what is shown.
Connecting and Using a PC Connection Using an DP Cable Select a connection method suitable for your PC. Connection Using the HDMI Cable HDMI ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the picture quality.
Connecting the Power Earphone Holder DP IN HDMI IN DP IN DC 14V D-SUB IN Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port Pull out the headphone holder. on the back of the product. Next, Put the headphones on.
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. ―...
Chapter 04 Menu ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Display Description Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter.
Language Description Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. ― It will not be applied to other functions on your PC.
Game mode Description Activate OD function Inactivate OD function Select the preferred aim point style. Crosshair FreeSync Premium FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution.
Mode Description Standard This menu provides an optimum picture quality suitable for the environment where the product will be used. • Standard : Select this mode when the surroundings are bright. Cinema • Cinema: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue. •...
Color Description Adjust the tint of the screen. Cool When the external input is connected through HDMI/DP and PC/AV Mode is set to (720P @ 60Hz and 1080P @ 60Hz). Warm Color Tone: Select a colour tone that best suits your viewing needs. When the external input is connected through HDMI/DP and PC/AV Mode is set to...
Aspect Description Aspect Select the best screen size and ratio. ― This menu is not available when FreeSync is enabled. mode • Auto: Display the picture according to the aspect ratio of the input source. • 16:9: Display the picture with an aspect ratio of 16:9. •...
Other Description Off Timer Activate the function of timed switch-off. Inactivate the function of timed switch-off. ― 4 hours automatic shutdown. Gamma Adjust the middle level of luminance. Gamma 1 / Gamma 2 Volume Adjust the Volume controlling the button UP/DOWN. Access the Volume control screen, then increase or decrease the Volume.
Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
Check the following. Customer Service Centre Installation issue (PC mode) ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 29
The message Check the cable connection and the settings of the source device. appears. Text is blurry. Check that the cable is properly connected to the product. If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel → Fonts →...
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. ― The path to the settings depends on the installed OS. How can I change the frequency? Set the frequency on your graphics card. •...
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. ― The above specifications are subject to change without notice to improve quality. ― For detailed device specifications, visit the Samsung website. ― Flicker Free...
Standard Signal Mode Table Model Name F24G3*T* F27G3*T* Synchronization (PANEL Spec) Vertical Frequency 48 - 144 Hz 48 - 144 Hz Resolution Optimum resolution 1920 x 1080 @ 144 Hz 1920 x 1080 @ 144 Hz Maximum resolution 1920 x 1080 @ 144 Hz 1920 x 1080 @ 144 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted.
Page 33
Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) D-SUB HDMI VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000...
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. • Remodeling or repairing the product by customer.
― If you encounter any issues when using the function, contact the Samsung Service Centre. FreeSync (for AMD graphics card) ― If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphic card.