Hardware Installation - Belkin ExpandView F1D068 User Manual

Hardware Installation

Overview
Installation of the ExpandView ™ involves four quick and easy steps to connect
four or eight monitors to a single computer video output or extend monitors
to distances as much as 200 feet (60.96 meters) from a computer. Simply
power on the attached computer and instantly all of the attached monitors
receive clear and colorful images.
Connecting each monitor to the ExpandView ™ will be simple if the correct
cables are used. The ExpandView ™ accepts standard high density DB15
monitor cables for each of the video outputs. For monitors that are at
extended distances, connect a Belkin Premium VGA Extension Cable (Part#
F2N025-XX) in between the monitor's cable and the ExpandView ™ .
Connecting the computer is also simple–use a Belkin Premium VGA Extension
Cable with Thumbscrews (Part# F2N025-XX-T) from the high density DB15
female port on the VGA compatible video card to the high density DB15 male
video input port on the ExpandView ™ .
NOTE: The "-XX" in the part number represents the length in feet
(1 ft. = 0.30m).
F2N025-XX-T
F2N025-XX-T
(Needing an extension cable
less than 15 feet (4.57m))
A3H981-XXX
(Needing an extension cable more
than 15 feet (4.57m) or using high
resolution/high refresh rate)
4