Advertisement
PIR Wall Black
89430
ADJUSTING THE LUX CONTROL LEVEL:
The Lux control module has a built-in sensing device (CdS photocell) that detects daylight and
darkness.
( ) position denotes that the lamp(s) (load) will be turned on by PIR during day and night.
( ) position denotes that the lamp(s) (load) will be turned on by PIR only at night.
You can set to operate the unit at the desired level by adjusting the LUX knob
ADJUSTING THE DURATION TIME:
The duration time is "the length of time that the 89430 witches the load 'on' after activation".
The duration time can be adjusted from (10±5) seconds to (4±1) minutes. Rotating the TIME knob
from (+) to (-) will reduce the duration time.
Note: Once the lamp(s) (load) has been triggered by the PIR sensor any subsequent detection
will start the timed period again from the beginning.
■TECHNICAL DETAILS
VOLTAGE:
WATTAGE:
DETECTION ANGLE:
DETECTION DISTANCE:
DURATION TIME:
LUX CONTROL LEVEL:
WATERPROOF:
Incandescent lamp
against toharmful effects due to ingress of solid foreign objects of 1.0 mm diameter
and greater and against splashing water
non-combustible surfaces
INSTRUCTION MANUAL
INSTRUCTION MANUAL
220 - 240V ~ 50 Hz
Max. 1000W for incandescent lamps
or Max. 300W for fluorescent
or Max. 150W for LED
Approximately 180°
Max. 12 meters
(10±5) seconds up to (4±1) minutes adjustable
From daylight to night adjustable
IP44
Fluorescent lamps
Micro-gap
Protected
Suitable for direct mounting on
Advertisement
