220~240V
50Hz
PIR Wall Black
89430
We are delighted that you have purchased this PIR detector.
This detector is constructed and tested to IP44 and is suitable
for outdoor use. Please read the instruction manual before
installation and retain for future reference.
IMPORTANT: Never modify the 89430, there are no user
serviceable parts inside. Not suitable for use with dimmer
switches. Install in accordance with I.E.C. Wiring Regulations
(Rigid Cable 0.75~1.50mm ). The 89430 SHOULD BE
INSTALLED BY A QUALIFIED
■POSITIONING THE UNIT
When selecting the mounting position, take into account the following points:
1. The sensor is designed for optimum performance when mounted 1.8-2.5 meters above
ground level.
2. Avoid positioning close to trees or shrubs which may cause false triggering during wet,
windy weather.
3. Avoid pointing at or positioning close to heat sources such as flues or heat extraction units,
which may cause false triggering.
4. Avoid pointing at bright lights as unit will not function when you set Lux control level to dark
( position)
5. Avoid mounting at strong electromagnetic disturbance, which may cause false triggering.
6. The sensor is most sensitive to movement across the detection area as opposed to directly
towards or away from the unit. Position the unit to point across flow areas.
INSTRUCTION MANUAL
INSTRUCTION MANUAL
IP44
2