Operation; Maintenance - ETEKCITY EM-SH7 Manual

Operation

1. Press the Power/Reverse button to turn on the
massager with heating. The massage nodes will change
direction every 60 seconds.
2. Press the Power/Reverse button to reverse the direction
of the massage nodes.
3. Press the Speed/Heat button once to increase or
decrease the speed of the massage nodes.
4. Press and hold the Speed/Heat button for 3 seconds to
turn on or turn off the warming function in the massager.
5. Press and hold the Power/Reverse button for 3 seconds
to turn off the massager.
NOTE:
• The device shuts off automatically after 20 minutes.
• It is recommended to leave the device off for at least 30 minutes
before the next use.

Maintenance

1. Unplug the massager, allow the unit to cool before
cleaning.
2. Remove the pillow cover, wash and dry it.
3. Wipe down the massager with a dry clean cloth.
DO NOT immerse the massager in water or liquid
4.
detergents.
5. If necessary, wipe down the massager with a clean, damp
cloth and dry immediately with a soft, dry cloth.
6. DO NOT attempt to repair the massager. Contact
customer service if the massager malfunctions or is in
need of repair.
7. Store the massager in a cool, dry place away from sharp
edges or pointed objects when not in use.
NOTE: To reduce the risk of electric shock, DO NOT remove the
housing cover.
EN
5