Steps
1. Align and place the sensor board on the display back cover.
2. Connect the LED cable to the connector on the sensor board and close the latch.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the
base
cover.
7. Install the
microSD
card.
8. Install the
SIM
card.
9. Exit
Service
Mode.
10. Follow the procedure in
Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
display
assembly.
9. Remove the
display
bezel.
10. Remove the
display
panel.
88
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.