Table of Contents
Advertisement
SETUP
Install filters
The arrow on the composite and deodorizing filter (2 pcs)
4
faces to the front panel and install it into the body. Rotate
the filter hook 1 down and the filter hook 2 up, fix the
filter. (Before installing the composite and deodorizing
filter, rotate the filter hook 1 up, then the filter hook 2
down)
2
1
2
Filter hook 1
Front panel
Filter hook
Notice
When removing or installing the filter, rotate the filter
hooks as required, otherwise may cause the filter hook
to fall off or damage.
Close the front panel (2 pcs).
5
2
Notice
Make sure the front panel
is closed in the position.
Close the front panel lock cover (2 pcs).
6
2
Front panel
12
2
1
Arrow
Composite and
deodorizing filter
(active carbon side
faces towards yourself)
Front panel lock cover
Power-on
Connect the power
plug.(Please purchase a
power plug that follows
local laws and regulations.)
(Wipe the water off power
plug and your hands before
connecting the power plug.)
When inserting the power plug,
the odor sensor takes this
moment as the baseline for the
level of cleanliness, so it is
recommended when the air in the
room is clean (such as when there
is no cigarette smoke).
(the odor sensor baseline is
updated automatically depending
on the level of cleanliness in the
room)
Power on, PM2.5 concentration /
timer display window shows
PM2.5 concentration.
PM2.5
PM2.5
Insert the power plug, press
and the "clean sign" blinks about
5 seconds.
5
Notice
Lead out the power cord from above
the base stand. If it comes out from
under the base stand, the power
cord may rub against the edge of the
base, causing the power cord to be
scratched.
,
Advertisement
Table of Contents
