Table of Contents
Advertisement
MAIN PARTS IDENTIFICATION
Light sensor
Detects the indoor brightness by the light
sensor, and automatically adjusts the
brightness of the indicators and the air
volume. (P. 24)
Filter replacement indicator
The indicator lights on indicates you need to
replace
composite and deodorizing filter.
Clean sign
Show the air pollution levels detected
by dirt sensor and odor sensor.
Blue: Indicates clean
Purple: Indicates slight dirty
Red: Indicates dirty
Air volume indicator
Indicates the current air volume status.
(When the product stops operating, the
control panel does not display this indicator.)
nanoe
indicator
®
nanoe
®
The indicator lights on indicates
nanoe
is being generated.
®
nanoe
will be generated in all
®
operation modes except you switch off
it. (P.22)
nanoe
nanoe
®
( 22
Human sensor indicator
This indicator lights on to indicate that the
human activity sensor is sensing.
(When the product stops operating, the
control panel does not display this indicator.)
(
Filter cleaning indicator
This indicator lights on to indicate that you
need to clean the composite and
deodorizing filter. (P.20)
10
24
(P. 21)
21
®
nanoe
®
20
PM2.5 concentration/timer display
window
PM2.5
Displays the PM2.5 concentration detected by
the dirt sensor, which may be different from
the value tested by other special devices.
Please use this PM2.5 concentration value as
a reference.
PM2.5
When the timer is set, the timing time will be
displayed. After about 15 seconds since the
timer setting has completed, it will
automatically jump to display the current
PM2.5 concentration.
15
Light sensor indicator
This indicator lights on to indicate that the
light sensor is sensing the indoor brightness.
(When the product stops operating, the
control panel does not display this indicator.)
Human sensor
When the movement of a person or pet is
detected, the air volume is automatically
adjusted (when the air volume is set to auto).
(Not all pet movements can be detected.)
The sensor sensitivity is adjustable. (P. 24)
PM2.5 indicator
PM2.5
This indicator lights on simultaneously when
the PM2.5 concentration/timer display
window displays the PM2.5 concentration.
PM2.5
Notice
You can touch and hold
for about 3 seconds to close the PM2.5
concentration/timer display window and the lit
indicators (except for the lit control buttons and
air volume indicator); touch and hold them again
for about 3 seconds to turn them back on.
3
3
PM2.5
PM2.5
24
PM2.5
and
simultaneously
PM2.5
Advertisement
Table of Contents
