Note After updating the telephone
software, it is advisable to remove the
phone from the list of devices paired to
the radio and pair it again for correct
operation.
Making a phone call
Press the steering wheel control
and say "Call" and the name of the
contact in the phonebook.
If the name is recognised, the
system will display the information for
the contact on the display.
The system will ask you to confirm
your request. To make the call, say
"Yes"; otherwise, say "No".
Alternatively, it is possible to call a
number that is not in the phonebook by
saying the number one figure at a
time.
Managing an incoming call
When a call is received, the system will
display the caller's ID, where available.
The incoming call will be signalled by
your mobile phone's personalised
ringtones (the availability of this function
depends on the specific features of
your phone).
Answering a call:
To answer the call, press
To end the call, press
than 1 second.
198
To reject a call: press
To ignore a call and not hear the ring
tone, press
Putting a phone call on HOLD
To place a call in progress on HOLD
and disable the microphone in order to
be able to speak without being heard
by the person you are talking to, press
/
.
VOICE COMMANDS
Global commands
SELECT MEDIA SOURCE;
SELECT RADIO SOURCE;
SELECT PHONE SOURCE;
CALL or DIAL;
READ MESSAGE;
SETTINGS;
HELP;
CANCEL;
REPEAT.
Phone commands
DIAL;
CALL (followed by name);
CALL (followed by number);
CALL BACK;
READ LAST;
;
for more
.
/
.
Audio Bluetooth®/USB/iPod Com-
mands
PLAY;
PAUSE;
STOP.
Radio
SELECT BAND "FM" "AM" or
"DAB".
Note It is advisable not to direct the
middle air vents towards the
microphone (fig. 137) because the
noise generated by the air on the
microphone could cause worsen voice
control performance.
137
F1D0999