Setting The Midi Channel; Modes Of Operation - ACL Mini MIDI User Manual

•
Calibration mode: With all DIP Switches in the "On" position, the MiniMIDI enters
the calibration mode (see chapter 5. CALIBRATION MODE).

4.1 SETTING THE MIDI CHANNEL

The Mini MIDI listens to Channel Voice on one MIDI channel.
After power up, the Mini MIDI waits for the first incoming MIDI Channel Voice Message
and sets the MIDI channel according to it.
! MIDI Channel Mode Messages are ignored. The module always works in POLY OFF
and MONO OFF mode, i. e. one MIDI Channel and one voice.

4.2 MODES OF OPERATION

Depending on which USB Ports are used, the Mini MIDI can operate in at least three
different modes. It also offers a calibration mode (see chapter 5. CALIBRATION MODE).
USB Device to CV/Gate
When a class compliant USB MIDI Device is connected to the USB DEVICE Port on the
Mini MIDI, MIDI messages from the Device will be directly converted and mapped to their
corresponding outputs on the Mini MIDI.
USB Host to CV/Gate
When a USB MIDI Host is connected to the USB HOST Port on the Mini MIDI, MIDI
messages from the Host will be directly converted and mapped to their corresponding
outputs on the Mini MIDI.
USB Device to CV/Gate, through USB Host
When both MIDI Device and Host are connected to the Mini MIDI, MIDI messages from
the Device will be redirected to the MIDI Host, and only MIDI messages from the Host
are converted and mapped to the corresponding outputs on the Mini MIDI.
This allows to play your modular set from the USB MIDI Device whilst simultaneously
recording this information into a MIDI track in your DAW.
9