Niko 360-45012 User Manual page 24

360-45012
Project planning
Lux settings of the Luxstat Control DALI daylight control module
Calculation form
Documentation of settings
Project:
No.:
Location:
Date:
Lux range
+
Measurement of indoor light intensity
(without artificial light) (Lx ind)
Lxind3 Lxind2 Lxind1
lux meter
Lux value at photo cell (Sensor)
Required light sensitivity (Setp)
Setp3 Setp2 Setp1
EN nv Niko sa
Zone 1
Lx ind1 _________ lux
:
Note! The lux value at the photo cell must be measured at the same daylight
conditions as the above measurement of indoor light intensity.
See lux value at the photo cell at the display of the Luxstat Control DALI
daylight control module: ____ lux
Factory setting for light sensitivity: 300 lux
If other set points are chosen, please note here:
Setp1 _________ lux
:
Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@niko.be — www.niko.eu
Luxstat Control DALI daylight control module: 360-45012
Photo cell: 350-1001X
Application:
3 - 300 lux 30 - 3000 lux
300 - 30 000 lux 600 - 60 000 lux
Zone 2
Lx ind2 _________ lux
:
Setp2 _________ lux
:
Zone 3
Lx ind3 _________ lux
:
Setp3 _________ lux
:
PM360-45012R12412