Advertisement
4.2
Program Modification
GB
The pre-recorded programs could be modified. Follow the
instructions shown below.
1. Press P button to select program (P1 - P8).
2. Press H button to set the hour indicator.
3. Press M button to increase the minute indicator setting by 15
minutes each time.
4. Push
/
button to adjust to your desired set temperature.
Temperature will be increased or decreased by 0.5°C for
each push.
5. Program temperature can only be set in the control
temperature range from 5°C to 35°C, not wrap around at two
ends.
1
2 3 4 5
6:00
20
°c
P1
.
0
-15-
6. Press D button will turn on or off the program. For example, you
want to turn off program 2, press P button to select program 2.
Then press D button. Program 2 is off as shown beside. Press D
button again will turn on the program.
1
2 3 4 5
--:--
P2
7. Hold H, M, or
button about 3 seconds to fast advance the
hour, minute, or temperature adjustment rate respectively.
8. Press R button to store the settings and back to normal
operation mode.
9. The settings will be stored automatically and back to normal
operation mode when no button is pressed about 10 seconds.
-16-
GB
Advertisement
