Advertisement
2 INSTALLATION
GB
This thermostat has been designed for simple and quick
installation requiring only a few tools.
CAUTION:
1. The appliance can only be mounted on dry indoor places.
2. A suitable fuse with rating not exceeding 5A, should be in the
power line.
3. Observe the national regulation for the wiring.
4. Qualified electrician is recommended for installation and
servicing.
2.1
Required Material
Hammer
Masking tape
Drill and 3/16" drill bit
Screwdriver
-5-
2.2
Removing your old thermostat
CAUTION: To avoid electric shock, turn off the power of the
heating system at the main power box in your home. Read the
following instructions carefully before disconnecting the wires.
1. Turn off the old thermostat.
2. Remove the cover from the old thermostat.
3. Unscrew the old thermostat from the wall plate.
4. Find and remove the screws attaching the wall plate to the wall.
Pull the wall plate a small distance from the wall. Do not
disconnect any wire yet, simply locate the wires.
Warning: After removing the wall plate, if you find that it is
mounted on a junction box (e.g. a box similar to one behind a
light switch or electric outlet), high voltage circuit may be
present and there is a danger of electric shock. Please consult
qualified electrician.
GB
a
-6-
Advertisement
