Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA
TREMOLO/PAN TP300. This high-quality effects pedal is designed to provide guitarists
easy-to-use tremolo and panning effect styles. Thanks to its high-performance features
you get the classic, warm and mind-bending tremolo/panning effects of vintage '60s amps.
The tremolo effect is achieved by periodic modulation of the input signal level. This results in
a continuous change from low to high level that has a quivering, tremulous sound character.
In panning mode the signal is periodically moved from one side of stereo image to the other.
The MODE switch selects between 2 tremolo modes and 2 panning modes.
PAN: Signal fluctuates between the left and right side of the stereo image. For this
effect both outputs (stereo) have to be used. In Triangle Wave mode the signal
fluctuates smoothly while in Square mode it changes sharply.
TREMOLO: Periodic changes of the signal level. In Triangle Wave mode the signal
level fluctuates smoothly while in Square mode it changes sharply.
The DEPTH control adjusts the amount of fluctuation concerning the signal level
(TREMOLO) and signal position (PAN).
The RATE control adjusts the speed of the fluctuation concerning the signal level
(TREMOLO) and signal position (PAN).
The RATE LED displays the speed of the effect determined with the RATE control
(flashes).
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use the 1/4" TS IN A and IN B connectors to plug in the instrument cables. For mono
use plug in IN A only.
The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use both
connectors if you want to achieve full stereo effect. For mono use plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The TP300 has no on/off switch. As soon as you insert the plug into the IN
connector, the TP300 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
ULTRA TREMOLO/PAN TP300
1. CONTROLS
Top view
Need help?
Do you have a question about the ULTRA TREMOLO/PAN TP300 and is the answer not in the manual?
Questions and answers