Advertisement
Before Using the Speaker System
■
Removing the Speaker Grilles
You can use the speakers either with or without their
grilles, which can be removed as follows.
Remove
■
Using the Supplied Cork Spacers
Make sure to use the supplied cork spacers for stable
bases and better-quality sound. The cork spacers also
protect the bottom of the speaker from migrations of a
plasticizer.
Attach the cork spacers to the four corners of the
bottom of the speaker.
Bottom
■
Using the Wall Fitting
The speaker can be mounted by using the wall fitting
on the back of the speaker. The supplied pads make
the speaker stable on the wall. Attach the pads to the
four corners of the back of the speaker as shown.
Using Speaker System as Surround Speaker
Make sure that the wall is strong enough to bear the
weight of the speaker.
A mounting screw's ability to support a speaker
depends on the material and the position of studs of
the wall. Use a thick and long screw with a head
diameter of 10 mm or less and a shank diameter of
4 mm or less. (We recommend a consultation with
professionals.)
Replace
Cork spacer
En-2
Pads
Wall fitting
Back
Pads
■
Mounting the Speaker
To mount the speaker by using commercially available
stands or fittings, use two keyhole slots (for M5 screw,
pitch 60 mm) on the back and bottom of the speaker.
Refer to instructions supplied with the stands or
fittings for the method of mounting. Use the stands or
fittings whose effective thread length is 9-12 mm
considering their thickness.
Commercially available fittings
M5 screw
5 mm
9-12 mm
Bottom
Keyhole slots for
M5 screw x 2
pitch 60 mm
Back
■
Precaution on Placement
・This speaker is not compatible with television sets
with Braun tubes.
・Magnets are used for this speaker. Please move the
speaker apart from the magnetizing objects such as
television sets with Braun tubes, watches, cash
cards, and floppy discs.
Keyhole slots for
M5 screw x 2
pitch 60 mm
Advertisement
