Config Sync - Devolo Magic 1 Manual

49 Network configuration
sary, devolo offers new versions on the Internet as
a file download, for example to modify existing
functions.
Current firmware
The currently
devolo Magic 1 WiFi
Searching for and updating firmware
automatically
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Magic 1 WiFi
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The devolo Magic 1 WiFi
updates its firmware. The option is enabled
by default.
Download updated firmware
If you have downloaded an updated firm-
1
ware file for the devolo Magic 1 WiFi
2-1
devolo Magic 1 WiFi
installed firmware of
2-1
is displayed here.
lets you know
2-1
automatically
2-1
your computer, navigate to the System

Firmware
Browse ... and select the downloaded file.
Confirm the update procedure with Update
2
firmware. After a successful update, the
the
devolo Magic 1 WiFi
Ensure that the update procedure is not inter-
rupted.

4.7.5 Config Sync

Config Sync allows settings to be configured uni-
formly for all devolo Magic devices in the network.
This includes the following settings e.g.:
WiFi network
b
Guest network
b
Mesh WiFi
b
Time control and time server settings.
b
In order to switch Config Sync on, activate the
Enable option.
Please note that the WiFi is always switched
on or off for the entire network. Therefore,
stop Config Sync first on a device that you
want to configure or switch separately.
2-1
to
Update firmware area. Click
2-1
restarts automatically.
