Table of Contents
Advertisement
21 Introduction
Before the networking procedure, write
down
devolo Magic 1 WiFi
device's unique key on the label on the rear
side of the housing.
In
devolo Magic 1 WiFi
tablet or smartphone later via WiFi, enter
the noted WiFi key as the network security
key.
In order to switch WiFi off, press and hold the
b
WiFi button longer than 3 seconds.
In order to switch WiFi back on, briefly tap
b
the WiFi button.
Connecting WiFi devices via WPS
If the device is still on factory defaults, tap the
b
WiFi button in order to activate WPS.
Wi-Fi-LED
1
White LED
2-1
devolo Magic 1 WiFi
the
WiFi
key
. You can find the
2-1
order
to
connect
with your laptop,
2-1
Flashing behavior
Flashes at intervals
of
0,1 sec. on
/
5 sec. off
If the WiFi connection was switched off and
b
of
the
you would like to activate WPS, press the
WiFi button twice; once to switch WiFi on,
and again to activate WPS.
If the WiFi connection is switched on and you
b
want to copy these settings to another
the
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
WPS is one of the encryption standards de-
veloped by the WiFi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).
2.3.3 Reading the Wi-Fi indicator light
The integrated Wi-Fi indicator light (LED) shows
the status of the devolo Magic 1 WiFi
nating and/or flashing
Meaning
The devolo Magic adapter is in
WPS mode to integrate Wi-Fi-
enabled devices via WPS.
2-1
by illumi-
LED status display
(web interface*)
Cannot be disabled
Advertisement
Table of Contents
