Table of Contents
Advertisement
24
www.aeg.com
1. Tap on the Temperature bar to
enter the submenu.
2. Scroll the submenu bar to set the
desired temperature. Cold= Cold
wash.
When you return to programme
summary screen, the set temperature will
be shown.
12.6
Spin Speed
When you set a programme, the
appliance automatically selects the
maximum spin speed.
1. Tap on the Spin Speed bar to enter
the submenu.
2. Scroll the submenu bar right or left
to:
• Decrease the spin speed;
The display shows only
the spin speeds available
for the set programme.
• or activate the Rinse & Hold
option ;
When you return to programme
summary screen, the indicator
shows up.
The water of the last rinse is not
drained out to prevent the fabrics
from creasing. The washing
programme ends with water in the
drum and the final spin phase is not
performed.
The door stays locked.
The drum turns regularly to reduce
creasing. You must drain the water to
unlock the door.
Touch the Start/Pause button: the
appliance performs the spinning
phase and drains the water.
• or activate the Extra Silent option.
When you return to programme
summary screen, the indicator
be on.
All spinning phases (intermediate spin
and final spin) are suppressed and the
programme ends with water in the
drum. This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
The door stays locked.
The drum turns regularly to reduce
creasing. You must drain the water to
unlock the door.
Touch the Start/Pause button: the
appliance performs the draining
phase only.
The appliance empties the
water out automatically after
approximately 18 hours.
12.7
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
Tap on the Eco bar to turn the option on.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy.
When you return to programme
summary screen, the shortcut
be on.
12.8
Stains
1. Tap on the Stains bar to enter the
submenu.
2. Tap on the bar of the option you
want to set:
• Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
This option can increase
the programme duration.
will
This option is not
available with a
temperature lower than
40 °C.
• Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
Eco
. The stain remover
will
Advertisement
Table of Contents
