AEG FAVORIT 54052VI User Manual page 18

18
Setting and starting a washing programme
2. Set the washing programme.
• The related programme indicator stays on.
• All the other programme indicators go off.
3. Close the appliance door, the washing programme starts automatically.
Starting the washing programme with delay start
1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Set the washing programme.
3. Press again and again the delay start button to set the number of hours.
• The related hour indicator comes on.
• The delay start indicator comes on.
4. Close the appliance door, the countdown starts automatically.
When the countdown is completed, the washing programme starts automatically.
The opening of the appliance door interrupts the countdown. When you close the door, the
countdown continues from the point of interruption.
How to cancel a washing programme or a delay start
If a washing programme or a delay start has not started, you can change the selection.
When a washing programme or a delay start are in progress, it is not possible to change the
selection. It is necessary to cancel the washing programme or the delay start to make a new
selection.
When you cancel the delay start, this automatically cancels the selected washing pro-
gramme. You have to select the washing programme again.
1. Press and hold the function buttons B and C until all the programme lights come on.
2. Make sure that there is detergent in the detergent dispenser before you start a new
washing programme.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The end indicator is on.
2. Deactivate the appliance.
For better drying results, keep the door ajar for some minutes.