Use Of The Appliance; Setting The Water Softener - AEG FAVORIT 54052VI User Manual

10

Use of the appliance

Deactivating the acoustic signals
1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Press and hold function button (B) and function button (C) at the same time until the
indicators of function buttons (A), (B) and (C) flash.
3. Release function button (B) and function button (C).
4. Press function button (C),
• The indicators of function buttons (A) and (B) go off.
• The indicator of function button (C) continues to flash.
• The end indicator comes on.
5. Press function button (C) again.
• The end indicator goes off. The acoustic signals are deactivated.
6. Deactivate the appliance to confirm.
To activate the acoustic signals again, do steps (1) through (4). Press function button (C),
the end indicator comes on and the acoustic signals are active.
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in your
area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function
(refer to 'Multitab function').

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in your
area.
Contact your local water authority to know the water hardness in your area.
German degrees
(°dH)
51 - 70
Water hardness
French degrees
(TH°)
91 - 125
mmol/l Clarke de-
grees
9,1 - 12,5 64 - 88
Water hardness ad-
justment
manually elec-
troni-
cally
10
1)
2