Table of Contents
Advertisement
Safety grounding terminal. A cable of adequate diameter must ground any terminal with this signal.
The accordance with directive
Important Information
Gas detectors must be checked for correct functioning by a qualified person after the installation but
before putting into operation. The was checked for correct functioning prior to delivery. The calibration
was performed with suitable calibration gases. This does not release the user from the obligation to
perform a check with test gas when the transmitter is put into operation after the installation and before
putting into operation.
Limitations of Liability
Neither Zeta Alarms Ltd nor any other affiliated organization shall be held liable under any circumstances
for any damage whatsoever including, without limitations, damages for loss of production, interruption
of production, loss of information, controller failure, personal injury, loss of time, money, or materials, or
the inability to use the product, even in the event that Zeta Alarms Ltd had been informed of such
damages.
Warranty
We hereby guarantee that the gas detectors GS-220.BC.V.ZETA have been manufactured and tested to
the highest quality standards.
We warrant above products to be free from materials and work defects for the period of 24 months from
the date of purchase. If such defects appear during the warranty period products will be repaired or
replaced with new products without charge.
4
Advertisement
Table of Contents
