Page of 15

Behringer Eurorack PRO RX1202FX User Manual

Ultra low-noise design 12-input mic/line rack mixer with premium mic preamplifiers and 24-bit multi-fx processor.
Hide thumbs
User's Manual
Version 1.0
February 2006

   Related Manuals for Behringer Eurorack PRO RX1202FX

   Summary of Contents for Behringer Eurorack PRO RX1202FX

  • Page 1

    User’s Manual Version 1.0 February 2006...

  • Page 2: Important Safety Instructions

    EURORACK PRO RX1202FX IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.

  • Page 3

    Internal switch-mode power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany EURORACK PRO RX1202FX...

  • Page 4

    With 8 phantom-powered microphone inputs as well as 4 high- headroom line inputs, the RX1202FX comprises a total of 12 channels. All channels come with 60-mm faders and the extremely musical 2-band EQ, the clip LEDs, as well as the 2 aux sends enable an uncompromising functionality of the console.

  • Page 5

    24-bit/192 kHz HD recorder, thereby main- taining optimal audio quality. MULTI-EFFECTS PROCESSOR In addition, the RX1202FX offers an effects processor equipped with 24-bit A/D and D/A converters. The FX processor puts at your disposal 100 presets with first-class room simulations, delay and modulation effects, and many multi-effects in outstanding audio quality.

  • Page 6

    1.3.3 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting (alternatively and kindly read the terms and conditions of our warranty carefully.

  • Page 7

    You can retrieve the signal at the send connector to direct it to an external effects device, for example. The AUX return input is used as the return path. The send buses of the RX1202FX are mono buses. As the name suggests, the FX sends of the EURORACK mixing consoles are intended to drive effects devices (reverb, delay, etc.) and are therefore configured post-fader.

  • Page 8

    Often, limiters are already built into active crossovers (e.g. BEHRINGER SUPER-X PRO CX2310 and ULTRADRIVE PRO DCX2496). Active crossovers are implemented directly before the power amplifier, and they divide the frequency range into several segments that are first amplified in the amplifiers and then passed on to the corresponding loudspeakers.

  • Page 9

    2. CONTROL ELEMENTS AND CONNECTORS EURORACK PRO RX1202FX When recording to an analog device, the VU meters of the recording machine should reach approx. +3 dB with low- frequency signals (e.g.

  • Page 10

    CLIP Fig. 2.5: Effects section 100 FIRST-CLASS EFFECTS The EURORACK RX1202FX features a built-in digital stereo effects processor. This effects processor offers a large number of standard effects such as Hall, Chorus, Flanger, Delay and various combination effects. Using the FX control, you can feed signals into the effects processor.

  • Page 11

    Fig. 3.1: The RX1202FX in a recording studio Even though most of the tasks in a studio can nowadays be accomplished using a computer, a mixing console remains an unavoidable piece of equipment that lets you effectively manage audio inputs and outputs: microphone signals need to be pre- amplified prior to being recorded, and the quality of microphone sound is often worked on;...

  • Page 12

    Two vocal microphones and the line outputs of a guitar and a bass amplifier are connected to the mono channels of the RX1202FX. A keyboard and a drum computer are connected to the stereo channels. The power amplifier in your sound system is connected to the main outputs;...

  • Page 13

    (PIN 1 and 3 connected) on the MIC input connectors when using the phantom power supply. Fig. 4.1: XLR connections Fig. 4.2: 1/4" mono plug EURORACK PRO RX1202FX Fig. 4.3: 1/4" stereo plug Fig. 4.4: Stereo plug for headphones connection 4. INSTALLATION...

  • Page 14: Specifications

    2/4/6/8 rightmost. Reference = +6 dBu. 1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; main output; gain @ unity. BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.

  • Page 15

    BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str.

Comments to this Manuals

Symbols: 0
Latest comments: