Technical Data - Leica SF 60 Instruction Manual

TECHNICAL DATA

EN EN
Guide number Guide number
See appendix
Flash modes Flash modes
– A and TTL with automatic TTL flash exposure control
– M for manual partial light output settings
– SD, SF for remote firing by flash pulse of master flash unit, with or
without pre-flash, flash exposure control through manually preset
partial light output settings
– for constant light
– ABC (requires Leica SF C1 controller, optional accessory), signal
transmission in 2.4 GHz band, for remote firing and controlling
– the flash mode (either M or TTL)
– the partial light output settings (in M mode) or flash exposure
compensation (in TTL mode)
Flash exposure compensation Flash exposure compensation
±2 EV in 1⁄3 EV increments (in
Manual partial light output levels Manual partial light output levels
1/1 – 1/256 in increments of 1/3 EV (
Manual video light output levels Manual video light output levels
9
Flash duration Flash duration
in , , modes: 1/800 s at full output
M SD SF
in , modes: 1/800 – 1/20 000 s at automatic output
A TTL
Color temperature Color temperature
About 5600 K at full output
Number of flashes/flash recovery time Number of flashes/flash recovery time
with device-internal power source; depending on battery type and flash
mode: min. 220 – max. 1500/in. 0.1 s – max. 5.5 s
34
mode)
TTL
, , modes)
M SD SF
Video light duration Video light duration
with device-internal power source with fresh batteries and at max. light
output (= level 9 9 ): approx. 3.5 h
Light coverage/focal lengths of zoom reflector Light coverage/focal lengths of zoom reflector
for 24/28/35/50/70/85/105/135/200 mm
down to 16 mm with integrated wide-angle diffuser
in flash mode: fully automatic setting only
A
Swivel and tilt settings/stop positions of reflector head Swivel and tilt settings/stop positions of reflector head
Vertical: 45°, 60°, 75°, 90°
Horizontal, in both directions: 30°, 60°, 90°, 120°, 150°, 180°
AF assist light AF assist light
Automatic activation, working range approx. 0.7 – 5 m
Special functions Special functions
High speed synchronization (HSS) if supported by camera model,
start-of-exposure and end-of-exposure synchronization, long exposure
synchronization, reduction of red eye effects (if supported by camera
model, camera setting)
Power supply Power supply
Alkaline batteries, 1.5 V, IEC type LR6 (AA/mignon size), nickel-metal
hydride (NiMH) rechargeable batteries, 1.2 V, IEC type HR6 (AA/
mignon size), 4 batteries in each case, external battery pack as
additional power supply (optional accessory by different manufacturers)
Power save system Power save system
Flash unit automatically switches to standby after 2 or 5 min
(depending on flash mode) and powers down after 60 min
Dimensions (W x H x D) Dimensions (W x H x D)
Reflector head in normal horizontal position: approx. 73 x 98 x 112 mm
Reflector head in vertical position approx. 73 x 162 x 75 mm
Weight (without batteries) Weight (without batteries)
approx. 300 g
Technical changes and errors excepted.