Remote Control - Abc; Group Selection - Leica SF 60 Instruction Manual

REMOTE CONTROL –
EN EN
You can operate any number of Leica SF 60 flash units from a
distance of max. 100 m
optional Leica SF C1 remote control. You can divide the flash units
into up to three groups, and create universal settings for all flash
units in a group independent of those for the other groups.
Setting applies for
all groups
Group-individual
setting option
available
Note
• Please refer to the Leica SF C1 device manual for further details
on how to operate the flash units via remote control.
Range in optimal conditions. Electric cables, metal objects, walls, etc. can
1
reduce the range, as can other 2.4 GHz remote controls operating in the
immediate vicinity.
24
ABC
in this mode and in conjunction with the
1
Flash mode: or
M TTL
Focal length and/or automatic operation of
the zoom reflector (see p. 16)
Flash exposure compensation (for
output level selection (for )
M
(see p. 22)
PREPARATION
Before a Leica SF 60 can be used in this mode (receiver), it must
first be "paired" with the Leica SF C1 (sender). Each device pair
only needs to be paired once. The process ensures that the flash
unit will only accept control signals from paired remote control
units.
Please read the instruction manual of the Leica SF C1 for more
details.

GROUP SELECTION

▸ Set the mode to
) or
TTL
• The Ready LED will flash at 2 s intervals to indicate readiness.
, or
A B C