External Battery Pack As Power Supply; Attaching/Detaching The Flash Unit - Leica SF 60 Instruction Manual

EXTERNAL BATTERY PACK AS POWER SUPPLY

EN EN
The SF 60 has a port for connecting an external battery pack (e.g.
by Nissin), for an increased maximum number of flashes and
shortened flash recovery times. These accessories can be sourced
from various manufactures and are available in specialist shops.
▸ Lift the rubber cover protecting the input jack
▸ Connect the battery pack via the supplied cable
Note
• The control functions of the SF 60 flash unit are powered
exclusively by the internal batteries. That is why these batteries
must still have enough power left to run these functions even if
an external battery pack is used.
14

ATTACHING/DETACHING THE FLASH UNIT

The flash unit can be attached to a camera or to the base stand
supplied. The stand attachment is the same as on the camera.
Notes
• Ensure that the camera is switched off while attaching the flash
unit.
• On cameras with an accessory shoe that lacks the necessary
hole for the locking pin, the spring-loaded pin fully retracts into
the mounting foot of the flash unit and will not damage the
surface of the accessory shoe.