Bootp Request And Reply Format - Motorola OM 2000 Installation & Operation Manual

APPENDIX C — INITIALIZATION INFORMATION
a downloaded FOF and the OM local copy are the same and a force download flag
does not exist in that FOF , the OM does not download any additional files. It
continues booting using the values stored in non-volatile memory.
An FOF and other downloaded files are transferred through Trivial File Transfer
Protocol (TFTP).
Initialization is complete when the OM finishes loading the executable software and
operating parameters, either from a new download or from memory.
The OM is configured to perform a BOOTP request (factory default).

BOOTP Request and Reply Format

BOOTP request and reply messages use the same packet format. The BOOTP
packet includes multiple fields divided into the following areas:
Standard Area
Vendor-Specific Area
BOOTP Request
In the BOOTP request, the OM includes:
•
A value indicating that the message is a BOOTP request
•
A MAC address
The BOOTP request is transferred using UDP .
BOOTP Server Reply
In the BOOTP reply to the OM, the BOOTP server includes:
•
A value indicating that the message is a BOOTP reply
•
The IP address of the boot server
•
The IP address assigned to that OM Ethernet port
•
The file-of-files (FOF) name for the OM (OM2000.fof)
•
The path for the FOF
•
The network mask
The BOOTP reply is transferred using UDP .
58
Contains fields for specifying basic BOOTP message information,
including:
•
Message type (request or reply)
•
MAC address of requesting device
•
IP address assignment of requesting device
•
Boot file name for the requesting device
•
Values for some standard fields must be specified and others
are optional, depending on whether the BOOTP message is a
request or reply
Contains fields for use as defined by the vendor: for example, to set
values for operating parameters