Motorola OM 2000 Installation & Operation Manual page 46

4 SETUP AND OPERATION
Figure 4-16 — OM 2000 Logical Ports Configuration window
Table 4-4 — System Time window field definitions
Item
Logical Port Index
Physical Interface
Operation Mode
Log Port State
Source UDP Port
Multicast IP Address
Output Destination IP
MPEG UDP Packing
PID Map Table
36
Definition
A number between 1 and 16
Which physical interface is assigned to the logical port
Input — physical interface is used as an input.
Output — physical interface is used as an output.
Use Unlocked only
Only used for Ethernet interface
Only used for Ethernet input interface. Up to four Multicast IP
addresses can be received per logical port.
IP address of where the output stream goes. Can be a singlecast or
multicast IP address.
Defines the number of MPEG packets per UDP packet transmitted.
Used to route logical input ports to logical output ports. Also used to
drop PIDs and/or remap PIDs.