2 OVERVIEW
Key
Connector/Indicator
6
7
Input/Output and Power Connections
Figure 2-7 illustrates the OM 2000 rear panel input/output connectors, power
connector, and fans:
Figure 2-7 — Rear panel
Table 2-4 identifies each connector and describes its function:
Table 2-4 — OM 2000 input/output and power connections
Key
Connector
1
1
2, 5
15
Description
–20 dB test RF monitor jack is an F-type connector that permits
convenient monitoring of the RF output at the front panel.
The OM 2000 display shows the IP address and RF frequency
configured on the device.
Description
The AC power input connector accepts inputs from
100 through 240 V AC (50 through 60 Hz).
The DC power input connector accepts inputs from
–40 through –60 V DC.
Two field replaceable fans extend from the rear of
the OM. To replace a fan, reference Appendix D,
"Fan Field Replacement Procedure."