Laser 4437 Instructions

SAFETY PRECAUTIONS
ALWAYS:
• Wear appropriate safety equipment.
• Refer to a reputable workshop manual and follow the detailed
instructions relevant to the vehicle being serviced.
• Always ensure the car is securely supported by axle stands or ramps
with the remaining wheels chocked and hand brake on.
• Prepare the existing bush joint before attempting to remove it.
• Clean off all rust, grime etc and prime with penetrating oil.
• Leave the oil to soak in for quite a while before attempting to remove.
• Inspect the tool prior to use and replace worn and damaged parts.
• Lubricate the threads on the centre screw before and after use.
• Care should be taken to align the bush and housing correctly.
• Do not apply excessive force.
• Do not use with an impact wrench.
• Use common sense and caution at all times.
4437