Table of Contents
Advertisement
Operating the appliance
en
Changing the programme
Press the A button.
1.
Select another program.
2.
Press the A button.The new
3.
program starts from the beginning.
Cancel the programme
For programs at high temperature:
Press the A button.
1.
To cool down laundry: Select '
2.
Rinse.
Press the A button.
3.
For programs at low temperature:
Press the A button.
1.
Select 0 Spin/Drain [//0 Spin/
2.
Empty [.
Press the A button.
3.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
Pressing the A button (the laundry
■
will be drained with the default spin
speed setting*) or
Selecting a spin speed or set the
■
program selector to 0 Spin/Drain
[//0 Spin/Empty [ and then
pressing the A button.
* depending on the chosen program ->
Overview of programmes
30
Programme end
End appears in the display panel and
the indicator lamp of the A button is
off.
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Turn the program selector to off
2.
position. The appliance is switched
off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Always wait until the program ends,
■
as the appliance could still be
locked.
If the display panel goes off at the
■
end of a program, the energy-saving
mode is active. Press any button to
activate the panel.
Do not leave any items of laundry in
■
the drum.They may shrink in the next
wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Advertisement
Table of Contents
