Bosch WAJ Series Instruction Manual And Installation Instructions

Bosch WAJ Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WAJ...
Instruction Manual and Installation Instructions
en

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAJ Series

  • Page 1 Washing machine WAJ... Instruction Manual and Installation Instructions...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4: Intended Use

    Intended use Sensors ....31 Intended use Automatic load sensing ..31 Unbalanced load detection system . 31 This appliance is intended for private ■...
  • Page 5: Safety Instructions

    Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine E lectrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries.
  • Page 6 Safety instructions Warning Warning Danger of death! Risk of poisoning! Children may lock themselves Detergents and care products in appliances, putting their lives may be poisonous if at risk. consumed. For appliances that have Keep detergents and care reached the end of their service products out of the reach of life: children.
  • Page 7: Environmental Protection

    ~ Supplementary sheet for the operating and installation Do’s instructions. Please visit our website Wash normally soiled laundry ■ ■ https://www.bosch-home.in/ without a prewash. metapages/e-waste-management to Save energy and detergent when ■ find out more details regarding washing lightly and normally soiled ewaste disposal laundry.
  • Page 8: Positioning And Connecting

    Positioning and connecting Information about the energy ■ Positioning and consumption The display provides information connecting about the relative energy consumption in the selected I ncluded with the appliance program. P o s i t i o n i n g a n d c o n n e c t i n g The more indicator lights light up, Check the machine for transport Note:...
  • Page 9: Safety Instructions

    Positioning and connecting ( Mains cable If the hose and mains cables are not ■ routed properly, there is a risk of 0 Bag: tripping and injury. Installation and operating ■ Lay hoses and cables in such a way instructions that there is no risk of tripping.
  • Page 10: Installation On A Base Or A Wooden Joist Floor

    Positioning and connecting Installation on a base or a Removing the transport locks wooden joist floor Caution! Damage to the appliance Caution! The machine is secured for Damage to the appliance ■ transportation using transport locks. The washing machine may "wander" If the transport locks are not and tip/topple from the base when removed, the machine may become...
  • Page 11: Hose And Cable Lengths

    Positioning and connecting Unscrew and remove all four Right-hand connection ■ transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Fit the covers. Lock the covers firmly in place by applying pressure to the * depending on model snap-in hooks.
  • Page 12: Water Outlet

    Positioning and connecting Do not bend, squash, modify or cut – Model: Aqua-Stop ■ through the water supply hose (otherwise its strength is no longer guaranteed). Only tighten the screw connections ■ by hand. If the screw connections are tightened too much with a tool (pliers), the thread may be damaged.
  • Page 13: Levelling

    Positioning and connecting You can lay the water drain hose as follows: Outlet in a sink ■ Warning Risk of scalding! When you are washing at high temperatures, there is a risk of Outlet into a plastic pipe with scalding if you come into contact ■...
  • Page 14: Electrical Connection

    Positioning and connecting Electrical connection Grounding Instructions Warning Warning Danger of death! Danger of death! Improper connection of the ground may There is a risk of electric shock if you result in electric shock. Have the touch live components. appliance checked by a qualified Never touch or hold the mains plug ■...
  • Page 15: Before Washing For The First Time

    Positioning and connecting Before washing for the first Transportation time e.g. when moving home The washing machine was thoroughly Preparatory work: tested before leaving the factory. To Turn off the water tap. remove any residues from the Reduce the water pressure in the production and to remove water that supply hose.
  • Page 16 Positioning and connecting Before switching on the appliance again: Notes The transport locks must be ■ removed. ~ "Removing the transport locks" on page 10 To prevent unused detergent from ■ flowing straight into the drain during the next wash: Pour approx. 1 litre of water into compartment II and start the 0 Spin/Drain [//0 Spin/Empty [ program.
  • Page 17: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Controls/display elements Washing machine door with integrated window handle...
  • Page 18: Control Panel

    Getting to know the appliance Control panel Control panel depending on the model ( Programmes ~ Supplementary sheet for the operating and installation instructions. 0 Programme selector 8 Display panel for settings and information The buttons are sensitive, they Note: only need to be touched gently.
  • Page 19: Display Panel

    Getting to know the appliance Display panel Button Display indicator Description selectable Temperature** ! ! ,Ž - 90 °C in °C; selectable Spin speed - - - -, 0 - 1400** 0 in rpm; 0 = no spin cycle, draining only; - - - - = Rinse Stop Finished in-time/Ready in-time/Finish in-time/Delay start* e.g.
  • Page 20 Getting to know the appliance More information on the display panel Display in- Description dicator 6.5 to 8** Load recommendation é { { ... Energy consumption* Program progress: Washing ß Rinse à Spin Program end - - - - 0 Program end during Rinse Stop Washing machine door è...
  • Page 21: Laundry

    Laundry You can find examples of levels of Laundry soiling on ~ Page 23 – Light: Do not prewash, select the P repare the laundry (Speed Perfect) G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
  • Page 22: Dyeing/Bleaching

    Detergent Dyeing/bleaching Detergent Dye should only be used in normal C orrect selection of detergent household quantities. Salt may damage D e t e r g e n t stainless steel. Always follow the dye The care label is crucial for selecting manufacturer's instructions.
  • Page 23: Saving Energy And Detergent

    Programme default settings Saving energy and detergent Programme default For light and normal soiling, you can settings save energy (lower washing temperature) and detergent. Y ou can find possible programme P r o g r a m m e d e f a u l t s e t t i n g s default settings in the overview;...
  • Page 24: Finished In-Time

    Programme default settings You can select "Rinse Stop" to prevent During the timer count-down, you can creasing if the laundry will not be taken change the preselected number of out of the washing machine immediately hours as follows: after the program has ended. Press the A button.
  • Page 25: Additional Programme

    Additional programme settings Easy-Iron Additional programme (Q) Easy-Iron) settings Button depending on the model You can find an overview of all possible Reduces creasing thanks to a special A d d i t i o n a l p r o g r a m m e s e t t i n g s additional settings on the spin sequence followed by fluffing and supplementary sheet for the installation...
  • Page 26: Anti Tangle

    Operating the appliance Soak Button depending on the model The laundry remains in water for an extended period(soaking period)before the wash cycle begins.particularly useful for starting to remove heavy soiling Select programme/switch on Anti tangle the appliance (Z,ë) If you have activated the Note: Button depending on the model childproof lock, you must first deactivate...
  • Page 27: Select Additional Programme

    Operating the appliance Overview of programmes ~ Place presorted items of laundry Supplementary sheet for the operating unfolded in the washing drum. and installation instructions. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, Select additional programme and close the door.
  • Page 28: Starting The Programme

    Operating the appliance Position the measuring aid for Filling measuring the correct amount of liquid Warning detergent: Eye/skin irritation! Pull out the detergent drawer. Press Detergent and care products may spray down the insert and fully remove the out if the detergent drawer is opened drawer.
  • Page 29: Childlock

    Operating the appliance additional rinse cycles to remove the The childproof lock remains Note: foam. active after the program has ended and Add less detergent to the next wash the appliance is switched off. You must cycle with the same load. always deactivate the childproof lock if you want to start a new program.
  • Page 30: Changing The Programme

    Operating the appliance Changing the programme Programme end End appears in the display panel and Press the A button. the indicator lamp of the A button is Select another program. off. Press the A button.The new program starts from the beginning. Removing laundry/switching Cancel the programme off the appliance...
  • Page 31: Sensors

    Sensors VoltCheck Sensors The automatic voltage control system A utomatic load sensing detects an unacceptable low voltage S e n s o r s supply. The colon on the Ready in The automatic load-sensing function display is flashing while there is an perfectly adapts the water consumption unacceptable undervoltage supply.
  • Page 32: Setting The Signal

    Setting the signal the program selector to the off position. Setting the signal The settings are saved. Y ou can change the following settings S e t t i n g t h e s i g n a l depending on the model: The volume of the information Cleaning and...
  • Page 33: Descaling

    Cleaning and maintenance ¾ Drum Clean 90 °C or i Detergent solution pump Cottons 90 °C program without blocked laundry. Add washing powder.~ "Faults and what to do Warning about them" on page 37 Risk of scalding! When you wash at high temperatures, Descaling the water gets very hot.
  • Page 34: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Filter in the water supply is blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any program (except 0 Spin/ Drain [//0 Spin/Empty [). Place the service flap back on, lock Press the A button.
  • Page 35: Faults And What To Do About Them

    Faults and what to do about them If the laundry has to be removed, the Faults and what to do washing machine door can be opened about them as follows: Switch off the appliance. Disconnect the mains plug. E mergency release Drain the water.
  • Page 36: Information On The Display Panel

    Faults and what to do about them Information on the display panel Display Cause/Remedy è lights up The door is locked. (after program start) è lights up The water level is too high. It is not possible to add laundry. ■...
  • Page 37: Faults And What To Do About Them

    Faults and what to do about them Display Cause/Remedy : of the 'Ready in' Mains voltage is too low. The program will continue after the voltage supply is recov- time flashes ered. . of the 'Ready in' time Undervoltage in the wash programme. The programme is extended. ~ Page 31 lights up Other displays Switch off the appliance, wait for five seconds and then switch it on again.
  • Page 38 Faults and what to do about them Faults Cause/Remedy The spin result is not sat- Not a fault – the unbalanced load detection system has interrupted the spin ■ isfactory. cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. Laundry is wet/too damp.
  • Page 39: After-Sales Service

    After-sales service Faults Cause/Remedy The display panel/indica- Has there been a power failure? ■ tor lights do not work Have the fuses blown? Reset/replace the fuses. ■ while the appliance is run- If the fault occurs repeatedly, call customer services. ■...
  • Page 40 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents