Anti Tangle; Anti Wrinkle; Operating The Appliance; Preparing The Washing Machine - Bosch WAJ Series Instruction Manual And Installation Instructions

Operating the appliance

en
Soak
(%)
Button depending on the model
The laundry remains in water for an
extended period(soaking period)before
the wash cycle begins.particularly useful
for starting to remove heavy soiling

Anti tangle

(Z,ë)
Button depending on the model
Reduces tangles upto 50%

Anti Wrinkle

(+)
Button depending on the model
Reduces wrinkles by upto 50%
1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
Also consider
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
26
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a program.
~ Page 29
Use the program selector to select the
required program. The program selector
can be rotated in either direction.
The appliance is switched on.
The following default settings and
program information for the selected
program appear in the display panel
Temperature*,
■
The maximum recommended load
■
and the duration of the program
(alternately)
Energy consumption*.
■
*depending on the model
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
~ "Programme default settings"
on page 23